SCRH: Inserts for Thermoplastics
SCRH: Inserts for Thermoplastics
Description
The SCR range is a self tapping range of inserts with internal and external threads and a slot to aid installation. It's designed to be installed into drilled or moulded holes and can be used where maximum strength is required.
Dimensions
| thread | B | C | D | L | holesize | holesize 2 |
| M2.5 | 0.58 | 6.0 | 4.5 | 6.0 | 4.0 - 4.1 | 4.1 - 4.3 |
| M3 | 0.58 | 6.5 | 5.0 | 6.0 | 4.5 - 4.6 | 4.6 - 4.8 |
| M3.5 | 0.73 | 7.5 | 6.0 | 8.0 | 5.3 - 5.4 | 5.5 - 5.7 |
| M4 | 0.89 | 8.0 | 6.5 | 8.0 | 5.8 - 5.9 | 6.0 - 6.2 |
| M5 | 1.06 | 9.5 | 8.0 | 10.0 | 7.1 - 7.2 | 7.3 - 7.6 |
| M6 | 1.32 | 12.0 | 10.0 | 14.0 | 8.6 - 8.8 | 9.0 - 9.4 |
| M8 | 1.32 | 14.0 | 12.0 | 15.0 | 10.6 - 10.8 | 11.0 - 11.4 |
| M10 | 1.57 | 16.0 | 14.0 | 18.0 | 12.6 - 12.8 | 13.0 - 13.4 |
All dimensions in millimetres unless stated.
Advantages
HIGH PULL OUT RESISTANCE HEADED VERSION FOR ELECTRICAL CONTACT AND HIGHER PERFORMANCE CAN BE USED IN MOST TYPES OF MATERIALS AVAILABLE IN HARDENED STEEL AND STAINLESS
Comments
EXAMPLE DESIGNATION FSUK SCR B M3 FSUK SCRH B M3 (HEADED)
AVAILABLE IN BRASS HARDENED STEEL AND STAINLESS STEEL
PLEASE NOTE HOLE SIZE 1 IS A GUIDE FOR THERMOPLASTICS AND HOLESIZE 2 IS A GUIDE FOR THERMOSETTING PLASTICS
CONTACT FSUK FOR FURTHER INFO IF REQUIRED
PLEASE NOTE THAT THE WALL THICKNESS WOULD BE TYPICALLY MINIMUM 0.3 X D ON THE SCR
THE SCRH RANGE STARTS FROM THREAD SIZE M4
Download PDF brochure for this product
Most sizes available from stock — contact FSUK for further info.
Enquire About This Product
Get in touch for pricing, availability and technical details on SCRH: Inserts for Thermoplastics.