SCRH: Inserts for Thermoplastics
3D Model AvailableSCRH: Inserts for Thermoplastics
Description
The SCR range is a self tapping range of inserts with internal and external threads and a slot to aid installation. It's designed to be installed into drilled or moulded holes and can be used where maximum strength is required.
Dimensions
| Thread Size | B mm | C mm | D mm | L mm | Hole Size mm | Hole Size 2 mm |
| M2.5 | 0.58 | 6.0 | 4.5 | 6.0 | 4.0 - 4.1 | 4.1 - 4.3 |
| M3 | 0.58 | 6.5 | 5.0 | 6.0 | 4.5 - 4.6 | 4.6 - 4.8 |
| M3.5 | 0.73 | 7.5 | 6.0 | 8.0 | 5.3 - 5.4 | 5.5 - 5.7 |
| M4 | 0.89 | 8.0 | 6.5 | 8.0 | 5.8 - 5.9 | 6.0 - 6.2 |
| M5 | 1.06 | 9.5 | 8.0 | 10.0 | 7.1 - 7.2 | 7.3 - 7.6 |
| M6 | 1.32 | 12.0 | 10.0 | 14.0 | 8.6 - 8.8 | 9.0 - 9.4 |
| M8 | 1.32 | 14.0 | 12.0 | 15.0 | 10.6 - 10.8 | 11.0 - 11.4 |
| M10 | 1.57 | 16.0 | 14.0 | 18.0 | 12.6 - 12.8 | 13.0 - 13.4 |
All dimensions in millimetres unless stated.
Advantages
High pull out resistance Can be used in most types of material Headed version for electrical contact and higher performance Available in brass, hardened steel and stainless steel
Comments
Example designation: FSUK SCR-B-M3
Headed Version: FSUK SCRH-B-M3
Please note: Hole size 1 is for thermoplastics, hole size 2 is for thermosetting plastics
Contact FSUK for further information
Additional note: The wall thickness would be typically minimum 0.3 X D on the SCR
The SCRH range starts at M4
Most sizes available from stock — contact FSUK for further info.
Enquire About This Product
Get in touch for pricing, availability and technical details on SCRH: Inserts for Thermoplastics.
SCRH: Inserts for Thermoplastics
3D Model Viewer — drag to rotate • scroll to zoom • right-click to pan
Loading 3D model…
Could not load 3D model