MU/H: Inserts for Thermo Setting Plastics
3D Model AvailableMU/H: Inserts for Thermo Setting Plastics
Description
The FSUK MU range is designed with multiple helically knurled rings designed to be installed into hard brittle Thermosetting Plastics. These inserts are often used in the Electrical industry. It's designed to be installed cold into drilled or moulded holes. The sharp knurls allows high performance in thinner bosses.
Dimensions
| Thread Size | B mm | C mm | D mm | P mm | L mm | Hole Size mm | Wall Thickness mm |
| M2 | 0.51 | 4.8 | 3.3 | 3.0 | 4.1 | 3.1 | 1.6 |
| M2.5 | 0.58 | 5.5 | 4.2 | 3.7 | 5.3 | 3.8 | 2.0 |
| M3 | 0.58 | 5.5 | 4.2 | 3.7 | 5.3 | 3.8 | 2.0 |
| M3.5 | 0.74 | 6.4 | 5.0 | 4.5 | 6.3 | 4.6 | 2.5 |
| M4 | 0.80 | 7.1 | 5.8 | 5.3 | 7.4 | 5.4 | 2.5 |
| M5 | 1.07 | 7.9 | 6.6 | 6.1 | 8.3 | 6.2 | 2.5 |
| M6 | 1.32 | 9.5 | 8.2 | 7.7 | 9.2 | 7.8 | 2.8 |
| M8 | 1.32 | 11.1 | 9.7 | 9.3 | 9.2 | 9.3 | 3.8 |
| M10 | 1.57 | 14.0 | 12.0 | 11.5 | 9.2 | 11.6 | 5.0 |
All dimensions in millimetres unless stated.
Advantages
Fast and easy to install Special pilot end prevents installation problems Relatively small diameter and length Headed version (MUH) for electrical contact and higher performance High torque resistance
Comments
Please note: The hole sizes apply to the point reached at the bottom of the insert
Example designation: FSUK MU B M3
Headed version: FSUK MUH B M3
Available in alternative finishes such as stainless steel
Most sizes available from stock — contact FSUK for further info.
Enquire About This Product
Get in touch for pricing, availability and technical details on MU/H: Inserts for Thermo Setting Plastics.
MU/H: Inserts for Thermo Setting Plastics
3D Model Viewer — drag to rotate • scroll to zoom • right-click to pan
Loading 3D model…
Could not load 3D model