HIS/H: Inserts for Thermoplastics
3D Model AvailableHIS/H: Inserts for Thermoplastics
Description
The HIS range of inserts has been developed with an opposing herringbone knurl on the outside to give a high level of performance in most Thermoplastics. This insert is available in a headed version (HISH) to increase performance and aid with electrical contacts. It's designed to be installed into drilled or moulded holes using either direct heat or ultrasonic. The insert is designed with a pilot end to aid insertion.
Dimensions
| Thread Size | A mm | B mm | C mm | D mm | P mm | Hole Size mm | Wall Thickness mm |
| M2 | 4.0 | 0.53 | 4.8 | 3.6 | 3.1 | 3,2 | 1.3 |
| M2.5 | 5.7 | 0.61 | 5.5 | 4.6 | 3.9 | 4.0 | 1.6 |
| M3 | 5.7 | 0.61 | 5.5 | 4.6 | 3.9 | 4,0 | 1.6 |
| M3.5 | 7.1 | 0.76 | 6.4 | 5.4 | 4.7 | 4.8 | 1.8 |
| M4 | 8.1 | 0.91 | 7.1 | 6.3 | 5.5 | 5.6 | 2.1 |
| M5 | 9.5 | 1.09 | 7.9 | 7.1 | 6.3 | 6.4 | 2.6 |
| M6 | 12.7 | 1.35 | 9.5 | 8.7 | 7.9 | 8.0 | 3.3 |
| M8 | 12.7 | 1.35 | 11.1 | 10.2 | 9.5 | 9.6 | 4.5 |
| M10 | 12.7 | 1.35 | 14.0 | 12.0 | 11.8 | 11.9 | 6.0 |
All dimensions in millimetres unless stated.
Advantages
High torque and pull-out resistance Suitable for thin boss walls to maximise design space Headed version for electrical contact and higher performance
Comments
Design allows rapid installation using heat or ultrasonics
Now stocking non standard lengths in m3 up to m6 and male threaded versions
Example designation: FSUK HIS-B-M3 Unheaded
FSUK HISH B M3 headed version
Please note hole sizes apply to the point reached at the bottom of the insert
Available in brass + some sizes in stainless
Most sizes available from stock
Contact FSUK for further info
Most sizes available from stock — contact FSUK for further info.
Enquire About This Product
Get in touch for pricing, availability and technical details on HIS/H: Inserts for Thermoplastics.
HIS/H: Inserts for Thermoplastics
3D Model Viewer — drag to rotate • scroll to zoom • right-click to pan
Loading 3D model…
Could not load 3D model