HIHL/H: Inserts for Thermoplastics
3D Model AvailableHIHL/H: Inserts for Thermoplastics
Description
The HIHL range has been designed with a rounded crest and knurl configuration to be installed into Notch Sensitive Plastics such as 30% Glass Filled Polycarbonate. This insert reduces the stress and is available in a headed version to increase performance and aid with electrical contacts. It's designed to be installed into drilled or moulded holes using direct heat and reduces the risks associated with cracking.
Dimensions
| Thread Size | B mm | C mm | D mm | P mm | L mm | Hole Size mm | Wall Thickness mm |
| M2 | 0.51 | 4.8 | 3.5 | 3.1 | 3.9 | 3.2 | 1.4 |
| M2.5 | 0.58 | 5.5 | 4.4 | 3.9 | 5.8 | 4.0 | 1.8 |
| M3 | 0.58 | 5.5 | 4.4 | 3.9 | 5.8 | 4.0 | 1.8 |
| M3.5 | 0.74 | 6.4 | 5.2 | 4.7 | 7.1 | 4.8 | 2.1 |
| M4 | 0.89 | 7.1 | 6.1 | 5.5 | 8.1 | 5.6 | 2.4 |
| M5 | 1.07 | 7.9 | 6.9 | 6.3 | 9.5 | 6.4 | 2.8 |
| M6 | 1.32 | 9.5 | 8.5 | 7.9 | 12.7 | 8.0 | 3.6 |
| M8 | 1.32 | 11.1 | 10.0 | 9.5 | 12.7 | 9.6 | 5.0 |
All dimensions in millimetres unless stated.
Advantages
Symmetrical to aid with installation Designed to reduce stress when using amorphous plastics Headed version for electrical contact and higher performance
Comments
Please note: Hole sizes apply to the point reached at the bottom of the insert
Example designation: FSUK HIHL-B-M
Headed version: FSUK HIHLH-B-M3
Most sizes available from stock — contact FSUK for further info.
Enquire About This Product
Get in touch for pricing, availability and technical details on HIHL/H: Inserts for Thermoplastics.
HIHL/H: Inserts for Thermoplastics
3D Model Viewer — drag to rotate • scroll to zoom • right-click to pan
Loading 3D model…
Could not load 3D model