MUH: Inserts for Thermo Setting Plastics
FSUK-MUH
FSUK-MU
Description
The FSUK MU range is designed with multiple helically knurled rings designed to be installed into hard brittle Thermosetting Plastics. These inserts are often used in the Electrical industry. It's designed to be installed cold into drilled or moulded holes. The sharp knurls allows high performance in thinner boses.
Dimensions
| thread | B | C | D | P | L | holesize(+0.1mm-0.0) | wall thickness | downloads |
| M2 | 0.51 | 4.8 | 3.3 | 3.0 | 4.1 | 3.1 | 1.6 | download |
| M2.5 | 0.58 | 5.5 | 4.2 | 3.7 | 5.3 | 3.8 | 2.0 | download |
| M3 | 0.58 | 5.5 | 4.2 | 3.7 | 5.3 | 3.8 | 2.0 | download |
| M3.5 | 0.74 | 6.4 | 5.0 | 4.5 | 6.3 | 4.6 | 2.5 | download |
| M4 | 0.80 | 7.1 | 5.8 | 5.3 | 7.4 | 5.4 | 2.5 | download |
| M5 | 1.07 | 7.9 | 6.6 | 6.1 | 8.3 | 6.2 | 2.5 | download |
| M6 | 1.32 | 9.5 | 8.2 | 7.7 | 9.2 | 7.8 | 2.8 | download |
| M8 | 1.32 | 11.1 | 9.7 | 9.3 | 9.2 | 9.3 | 3.8 | download |
| M10 | 1.57 | 14.0 | 12.0 | 11.5 | 9.2 | 11.6 | 5.0 | download |
Advantages
FAST AND EASY TO INSTALL A SPECIAL PILOT END PREVENTS INSTALLATION PROBLEMS RELATIVELY SMALL DIAMETER AND LENGTH HEADED VERSION FOR ELECTRICAL CONTACT AND HIGHER PERFORMANCE HIGH TORQUE RESISTANCE
Comments
PLEASE NOTE HOLE SIZES APPLY TO THE POINT REACHED AT THE BOTTOM OF THE INSERT
EXAMPLE DESIGNATION: FSUK MU B M3
SOME SIZES AVAILABLE IN STAINLESS
click HERE for a PDF version of this brochure page
Most sizes available from stock contact fsuk for further info.
Quick Product Links
