SCRH: Inserts for Thermoplastics
FSUK-SCRH
FSUK-SCR
Description
The SCR range is a self tapping range of inserts with internal and external threads and a slot to aid installation. It's designed to be installed into drilled or moulded holes and can be used where maximum strength is required.
Dimensions
| thread | B | C | D | L | holesize | holesize 2 | downloads |
| M2.5 | 0.58 | 6.0 | 4.5 | 6.0 | 4.0 - 4.1 | 4.1 - 4.3 | download |
| M3 | 0.58 | 6.5 | 5.0 | 6.0 | 4.5 - 4.6 | 4.6 - 4.8 | download |
| M3.5 | 0.73 | 7.5 | 6.0 | 8.0 | 5.3 - 5.4 | 5.5 - 5.7 | download |
| M4 | 0.89 | 8.0 | 6.5 | 8.0 | 5.8 - 5.9 | 6.0 - 6.2 | download |
| M5 | 1.06 | 9.5 | 8.0 | 10.0 | 7.1 - 7.2 | 7.3 - 7.6 | download |
| M6 | 1.32 | 12.0 | 10.0 | 14.0 | 8.6 - 8.8 | 9.0 - 9.4 | download |
| M8 | 1.32 | 14.0 | 12.0 | 15.0 | 10.6 - 10.8 | 11.0 - 11.4 | download |
| M10 | 1.57 | 16.0 | 14.0 | 18.0 | 12.6 - 12.8 | 13.0 - 13.4 | download |
Advantages
HIGH PULL OUT RESISTANCE HEADED VERSION FOR ELECTRICAL CONTACT AND HIGHER PERFORMANCE CAN BE USED IN MOST TYPES OF MATERIALS AVAILABLE IN HARDENED STEEL AND STAINLESS
Comments
EXAMPLE DESIGNATION FSUK SCR B M3 FSUK SCRH B M3 (HEADED)
AVAILABLE IN BRASS HARDENED STEEL AND STAINLESS STEEL
PLEASE NOTE HOLE SIZE 1 IS A GUIDE FOR THERMOPLASTICS AND HOLESIZE 2 IS A GUIDE FOR THERMOSETTING PLASTICS
CONTACT FSUK FOR FURTHER INFO IF REQUIRED
PLEASE NOTE THAT THE WALL THICKNESS WOULD BE TYPICALLY MINIMUM 0.3 X D ON THE SCR
THE SCRH RANGE STARTS FROM THREAD SIZE M4
click HERE for a PDF version of this brochure page
Most sizes available from stock contact fsuk for further info.
Quick Product Links
